#Download ixtreme lt v2 firmware for xbox 360 slim full
We now have full access to the internals of the Xbox 360 Slim:
13) The attachment body is completely removed. 12) Remove the upper decorative panel of the console:. One of them is hidden under the warranty seal, which must be removed: 10) "Opening" all the latches, the lower decorative panel of the console can be removed easily:. 9) Next, when the latches on the back of the case are "open", slowly and carefully "expand" the case from the back to the side of the "face" so that you can "open" the following latches on the front panel: Be careful when removing the front panel of the console since from the front panel there is a loop to the socket on which the antenna is installed, the status diodes of the console, etc. 7) In the same way, with a thin tool we pry and move two latches:. 5) Pry the latches with a thin tool around the perimeter, as shown in the picture below and "remove" the silver strip:. 4) Pry off the black plug with a thin tool and carefully "pull out":. Gap) between the plug and the console body itself, as shown in the figure below: You can try to push the clips through the ventilation holes, or use a thin tool (thin screwdriver, etc.) to push the panels apart (make 3) With the side without a hard drive, it won't be much more complicated. 2) Move the clips through ventilation holes console and remove the plastic console cover:. 1) First, remove hDD from the prefix: Remove the stub hard disk. * Long thin stick (or any other equivalent) for removing side plugs. * Screwdriver with torx8 attachment for unscrewing screws 
To open the body of the Xbox 360 Slim we need the following items: Disassembly of the case of the xbox 360 slim
0 kommentar(er)
